The Quick Installation Cleaner:
The intended users are the existing homeowners that would like to have a simple to clean shower or bathtub but would prefer not to remodel as needed for the fully automated product.  The product utilizes the same patent pending, process as the fully automated cleaning product.  This cleaner is not as simple to use as the fully automated cleaner but it cleans just as effectively as the automated cleaner.

This Cleaning System:
This product has a permanently mounted control box.  The control box is to be mounted to the exterior surface of a wall near or above the shower/bathtub.  The control box houses the control panel and pump.  The control panel allows the user to set the cleaning cycle time, start the cleaning cycle, and stop the cleaning cycle if necessary.  All the tubing and nozzles and/or spray bars are installed on the accessible surfaces of the walls and shower or on the hidden side of the door frame; making the installation quick and easy.  The quick install nozzles are hidden to the degree that the installer can hide them without remodeling.

To Use this System, the User:
1) installs the tubed plug
2) plugs the electrical power cord into a household outlet
3) pours the cleaning liquid in the shower/bathtub
4) sets the cleaning cycle time if different than the previous cleaning
5) pushes the 'Start' button

At the end of the cleaning cycle, the user has the option of having the cleaning liquid pumped into a storage bottle allowing the cleaning liquid to be reused until the cleaning liquid loses its effectiveness.  This is accomplish just by having the storage bottle attached and press the recycle button.


When the cleaning cycle is complete, the user will have to store the tubed plug and power cord.  This version has no rinse cycle and all of the cleaning liquid is drained unless steps are taken to recycle the cleaning liquid.

The Aesthetics:

The homeowner can take steps to hide all the components.  But since the installation is intended to be simple and quick, some tubing in a few installations might be visible.  The homeowner can hide the control box but this would increase the time and expense of the installation.  If visible, the control box can be made to blend in to any décor as much as possible.  It is paintable.

Take any ordinary shower that requires regular scrubbing and quickly convert it to a Simple2Clean shower that never needs to be scrubbed.


In minutes, a quick installation cleaner with spray strips can be mounted above or near any shower or bathtub.  The cleaner and strips can be modified to blend into or match any décor.  Some spray bars can even be mounted to the top of the door frame making them virtually disappear.